Unrivaled Excellence in Electronics Calibration Services

Accredited Labs offers professional calibration services for amp probes, also known as current clamps or current probes. These versatile instruments are essential for measuring electrical current in conductors without the need to break the circuit or make physical contact. Amp probes are widely used in electrical troubleshooting, maintenance, and power quality analysis across various industries. Our calibration process ensures the accuracy and reliability of your amp probe, regardless of manufacturer. We use precision current sources and reference standards to verify the probe's performance across its specified range, checking for linearity, frequency response, and phase angle errors. By choosing Accredited Labs for your amp probe calibration, you can trust that your equipment will meet the highest standards of accuracy and performance, ensuring reliable measurements in your electrical applications.

Accredited Labs offers comprehensive calibration services for clamp meters, essential tools used to measure electrical current without breaking the circuit. Our calibration capabilities cover a wide range of clamp meter types, including Hall effect, flexible, and current transformer models, as well as those with wireless and remote display features. We calibrate devices from leading manufacturers such as Fluke Electronics, AEMC Instruments, Klein Tools, Inc., Ideal, and Amprobe.

Accredited Labs offers professional calibration services for Clamp Transducers, essential devices used in various industries to measure electrical current without direct contact with the conductor. These non-invasive instruments clamp around a wire or cable, utilizing the principle of electromagnetic induction to accurately measure AC current flow. Our calibration process involves comparing the clamp transducer's output against traceable reference standards across multiple current ranges and frequencies. This ensures the device maintains its specified accuracy and reliability, crucial for applications in power distribution, electrical maintenance, and energy management. By calibrating your clamp transducers with Accredited Labs, you can be confident in the precision and performance of your measurement equipment.

Accredited Labs provides expert calibration services for current meters from leading manufacturers such as Simpson, Martel Electronics, Yokogawa, Fluke Electronics, and National Instruments Corporation. Current meters are essential instruments used to measure electrical current flow in various applications, including electrical testing, industrial process control, and power system monitoring. Our calibration process ensures these devices maintain their accuracy and reliability by comparing them against traceable standards. We utilize precision current sources and high-accuracy reference meters to verify performance across multiple ranges and frequencies. Our calibration service helps maintain the integrity of your measurements, ensuring compliance with industry standards and regulations.

Accredited Labs offers professional calibration services for current probes from leading manufacturers such as Fluke Electronics, AEMC Instruments, Pico, and Tektronix Corporation. Current probes are essential instruments used to measure electrical current in conductors without breaking the circuit. These devices are crucial for electrical testing, troubleshooting, and maintenance across various industries. Our calibration process ensures that your current probes provide accurate and reliable measurements by comparing them to traceable standards. We verify the probe's performance across its specified range, adjusting for factors such as linearity, frequency response, and phase shift. Trust Accredited Labs to maintain the precision and dependability of your current probes, helping you meet industry standards and regulatory requirements.

Accredited Labs offers professional calibration services for leakage current measuring equipment, including devices from manufacturers such as Simpson and Tyco International plc. Leakage current testers are essential instruments used to measure small electrical currents that flow through insulation or between isolated conductors in electrical and electronic systems. These measurements are critical for ensuring safety, compliance with standards, and optimal performance of various equipment. Our calibration process involves comparing the device under test to a traceable reference standard, adjusting for accuracy, and verifying performance across multiple measurement ranges. By calibrating your leakage current equipment with Accredited Labs, you can ensure precise measurements and maintain regulatory compliance in your operations.

Accredited Labs offers comprehensive calibration services for volt meters from leading manufacturers such as National Instruments Corporation, Yokogawa, Fluke Electronics, Red Lion Controls, Inc., and Miller Electric Mfg. Co. Volt meters are essential instruments used to measure electrical potential difference (voltage) in various applications across industries. Our calibration process ensures these devices maintain their accuracy and reliability by comparing their readings against traceable standards. We perform rigorous tests to verify the meter's performance across multiple voltage ranges and frequencies, adjusting as necessary to meet manufacturer specifications. Trust Accredited Labs to keep your volt meters operating at peak precision, ensuring the integrity of your electrical measurements and compliance with industry standards.

Accredited Labs offers comprehensive calibration services for multimeters, essential electronic instruments designed to measure multiple electrical parameters, primarily voltage, current, and resistance. Our expertise covers a wide range of multimeter types, including handheld, benchtop, insulation testing, clamp-on, digital, and analog models from leading manufacturers such as Fluke Electronics, National Instruments, Hewlett-Packard, Keithley, and Keysight Technologies. Multimeters utilize test leads and input jacks to connect to electrical circuits, providing accurate readings on digital or analog displays. Our calibration process ensures these instruments maintain their precision and reliability, crucial for various industrial and scientific applications. We service popular models like the Fluke 87-series and 170-series, Megger AVO300 and AVO400 series, as well as multimeters from AEMC, Extech, and Amprobe. Trust Accredited Labs to keep your multimeters operating at peak performance, guaranteeing accurate measurements across diverse electrical parameters.

Accredited Labs offers professional calibration services for multimeter-scopes, versatile instruments that combine the functionality of a digital multimeter and an oscilloscope. These devices are essential for measuring electrical parameters and visualizing waveforms in various electronic applications. Our calibration process ensures the accuracy and reliability of multimeter-scopes from leading manufacturers such as Fluke Electronics, Tektronix Corporation, and B&K Precision. During calibration, we verify and adjust voltage, current, resistance, and frequency measurements, as well as time base, amplitude, and triggering functions. Our expert technicians use traceable standards and industry-approved procedures to deliver precise calibration results, helping you maintain the highest level of measurement integrity for your critical electronic testing and troubleshooting tasks.

Accredited Labs offers professional calibration services for Ohm meters, essential instruments used to measure electrical resistance in various applications. Our calibration process ensures the accuracy and reliability of Ohm meters from leading manufacturers such as National Instruments Corporation, AEMC Instruments, and Fluke Electronics. During calibration, we compare the Ohm meter's readings against traceable resistance standards across multiple ranges, adjusting as necessary to meet manufacturer specifications. This process verifies the instrument's performance, helping to maintain measurement integrity in electrical testing, quality control, and research environments. Trust Accredited Labs to keep your Ohm meters operating at peak precision, supporting your critical resistance measurement needs.

Accredited Labs offers professional calibration services for LCR meters from leading manufacturers such as Agilent Technologies, Keysight Technologies, Extech Instruments, GW Instek, and B&K Precision. LCR meters are precision instruments used to measure inductance (L), capacitance (C), and resistance (R) in electronic components and circuits. These meters are essential for quality control, component testing, and product development in various industries. Our calibration process ensures the accuracy and reliability of LCR meters by comparing their measurements against traceable standards. We verify and adjust the meter's performance across multiple test frequencies and measurement ranges, guaranteeing precise readings for your critical applications. Trust Accredited Labs to maintain the integrity of your LCR meters and support your quality assurance efforts.

Accredited Labs offers professional calibration services for Micro Ohm meters from leading manufacturers such as Extech, AEMC, Megger, Biddle, B&K Precision, and Keithley. Micro Ohm meters are precision instruments designed to measure extremely low resistances, typically in the range of micro-ohms to milliohms. These devices are crucial in various industries for testing electrical connections, motor windings, and other low-resistance components. Our calibration process involves comparing the Micro Ohm meter's readings against traceable resistance standards using specialized equipment and techniques. We ensure the accuracy and reliability of your instrument, helping maintain compliance with industry standards and regulations. Trust Accredited Labs to keep your Micro Ohm meter performing at its best.

Accredited Labs offers professional calibration services for Process Meters from leading manufacturers such as Fluke Electronics, Altek, and Ashcroft. Process Meters are versatile instruments used in industrial settings to measure, display, and analyze various process variables like voltage, current, temperature, and pressure. Our calibration procedure ensures these critical devices maintain their accuracy and reliability. We use precision sources and reference standards to verify the meter's measurement capabilities across its specified ranges. Our technicians assess input and output functions, display accuracy, and any additional features like data logging or alarm settings. By choosing Accredited Labs for your Process Meter calibration needs, you can trust that your equipment will perform to manufacturer specifications, supporting the integrity of your processes and quality control measures.

Accredited Labs offers comprehensive calibration services for power supplies, essential devices that provide controlled electrical power to various equipment and instruments. Power supplies are critical in laboratory, industrial, and testing environments, where precise and stable voltage or current outputs are required. Our calibration services cover a wide range of power supply types, including DC linear, portable DC, variable AC/DC, and programmable units from leading manufacturers like Agilent Technologies, Keysight Technologies, Kikusui Electronic Corp., Advanced Energy, and Hewlett-Packard.

Accredited Labs offers comprehensive calibration services for optical power meters, essential instruments used to measure the power of light sources in various applications, including telecommunications, fiber optics, and laser systems. Our expert technicians calibrate optical power meters from a wide range of manufacturers, ensuring accurate and reliable measurements across different wavelengths and power levels. The calibration process involves comparing the device under test to NIST-traceable reference standards, adjusting for any deviations, and verifying performance within specified tolerances. By choosing Accredited Labs for your optical power meter calibration needs, you can trust that your equipment will maintain optimal accuracy and performance, crucial for maintaining the integrity of your optical systems and processes.

Accredited Labs offers professional calibration services for light meters from leading manufacturers including Lighthouse Technologies, Extech Instruments Corporation, Fisher Brand Inc., Spectroline, and Greenlee. Light meters, also known as illuminance meters or lux meters, are precision instruments used to measure the intensity of light in various environments. These devices are critical in industries such as photography, film production, agriculture, and workplace safety to ensure proper lighting conditions. Our calibration process involves comparing the light meter's readings against traceable standards using controlled light sources. We verify and adjust the meter's accuracy across multiple intensity levels and spectral ranges, ensuring reliable performance in diverse applications. Trust Accredited Labs to maintain the precision and consistency of your light measurement equipment.

Accredited Labs provides expert calibration services for oscilloscopes, essential electronic test instruments used to visualize and analyze electrical signals over time. We calibrate both benchtop and handheld oscilloscopes from leading manufacturers, including Tektronix, LeCroy, Keysight Technologies, Yokogawa, and National Instruments. Oscilloscopes display voltage-versus-time graphs, allowing technicians to measure and troubleshoot signal characteristics. Our calibration process ensures accurate voltage and time measurements, verifying the instrument's vertical and horizontal scales, trigger functions, and probe compensation. By choosing Accredited Labs for your oscilloscope calibration needs, you can trust that your equipment will perform reliably and precisely across various applications in electronics testing, research, and development.

Accredited Labs provides expert calibration services for Electronic Counters from leading manufacturers such as Keysight Technologies, Inc., Agilent Technologies, Inc., and Anritsu. Electronic Counters are precision instruments used to measure frequency, time intervals, and other signal characteristics in various electronic applications. Our calibration process ensures these devices maintain their accuracy and reliability, utilizing state-of-the-art equipment and traceable standards to verify and adjust key parameters. We assess and calibrate functions including frequency measurement, period measurement, and time interval analysis. Our comprehensive service helps maintain the integrity of your electronic testing and measurement processes, ensuring compliance with industry standards and regulations.

Accredited Labs provides expert calibration services for Electronic Loads from various manufacturers, including Dynaload, Inc. and HD Electric Company. Electronic Loads are essential instruments used in testing power supplies, batteries, and other electrical sources by simulating different load conditions. These devices can operate in constant current, constant voltage, or constant resistance modes, allowing for precise control of electrical parameters. Our calibration process ensures the accuracy and reliability of Electronic Loads by verifying their performance against traceable standards. We assess and adjust key parameters such as voltage and current measurement, load regulation, and transient response. Our comprehensive calibration service helps maintain the integrity of your testing equipment, ensuring accurate results and compliance with industry standards.

Accredited Labs offers expert calibration services for Network Analyzers from leading manufacturers such as Hewlett-Packard, Keysight Technologies, Inc., Agilent Technologies, Inc., Anritsu, and JDSU Corporation. Network Analyzers are sophisticated instruments used to measure the performance of electrical networks, particularly in high-frequency applications like RF and microwave systems. These devices characterize the amplitude and phase properties of networks, providing critical data on parameters such as S-parameters, impedance, and gain. Our calibration process ensures the accuracy and reliability of these measurements by comparing the analyzer's performance against traceable standards, adjusting for systematic errors, and verifying its ability to measure known values within specified tolerances. Trust Accredited Labs to maintain the precision of your Network Analyzers, ensuring the integrity of your RF and microwave testing operations.

Accredited Labs provides expert calibration services for Power Analyzers from leading manufacturers such as Yokogawa, National Instruments Corporation, AEMC Instruments, and Tektronix Corporation. Power Analyzers are sophisticated instruments used to measure electrical power parameters, including voltage, current, power factor, and harmonic distortion in various electrical systems and devices. Our calibration process ensures these critical instruments maintain their accuracy and reliability, utilizing traceable standards to verify and adjust measurements across multiple ranges and functions. By calibrating your Power Analyzer with Accredited Labs, you can trust that your equipment will deliver precise, consistent results for all your power measurement needs.

Accredited Labs offers comprehensive calibration services for Signal Analyzers from leading manufacturers such as National Instruments, Hewlett-Packard, Agilent Technologies, Rohde & Schwarz, and Anritsu. Signal Analyzers are sophisticated electronic test instruments used to measure and analyze the characteristics of electrical signals, including frequency, amplitude, and modulation. These devices are critical in various industries, including telecommunications, aerospace, and electronics manufacturing. Our calibration process ensures that your Signal Analyzer maintains its accuracy and reliability by comparing its performance against traceable standards. We verify and adjust key parameters such as frequency response, amplitude accuracy, and noise floor to meet manufacturer specifications. Trust Accredited Labs to keep your Signal Analyzers operating at peak performance, ensuring the integrity of your measurements and compliance with industry standards.

Accredited Labs offers comprehensive calibration services for spectrum analyzers from leading manufacturers such as Agilent Technologies, Rohde & Schwarz, Keysight Technologies, and Tektronix. Spectrum analyzers are sophisticated electronic test instruments used to measure and analyze the frequency spectrum of signals, essential in various industries including telecommunications, aerospace, and electronics manufacturing. Our calibration process ensures these critical instruments maintain their accuracy and reliability, verifying parameters such as frequency response, amplitude accuracy, and noise floor performance. We employ state-of-the-art equipment and follow industry-standard procedures to calibrate spectrum analyzers across a wide range of frequencies and power levels, guaranteeing optimal performance and compliance with regulatory requirements.

Accredited Labs offers professional calibration services for Sound Level Meters, including those manufactured by Extech Instruments Corporation. Sound Level Meters are precision instruments used to measure noise levels in various environments, ensuring compliance with safety regulations and standards. Our calibration process involves verifying the accuracy of the meter's microphone, amplifier, and display against traceable reference standards. We perform acoustic calibration using a sound calibrator that generates a known sound pressure level, typically at 94 dB and 114 dB, at a specific frequency (usually 1 kHz). This process ensures the meter's response is within acceptable tolerances across its operational range. Our calibration service helps maintain the reliability and accuracy of your Sound Level Meters, critical for occupational health and safety, environmental noise monitoring, and acoustical research applications.

Accredited Labs offers professional calibration services for Audio Sources and Oscillators, essential instruments in audio and electronic engineering. These devices generate precise electrical signals at specific frequencies and amplitudes, crucial for testing and calibrating audio equipment, communication systems, and other electronic devices. Our calibration process ensures that these instruments produce accurate and consistent output across their operational range. We use state-of-the-art equipment and traceable standards to verify and adjust frequency accuracy, amplitude stability, distortion levels, and signal purity. Our expertise extends to calibrating equipment from various manufacturers, guaranteeing that your Audio Sources and Oscillators meet industry standards and perform optimally in your applications.

Accredited Labs offers professional calibration services for Gauss Meters, including those manufactured by Magna Flux. A Gauss Meter, also known as a magnetometer, is a precision instrument used to measure magnetic field strength and flux density. These devices are essential in various industries, including manufacturing, research, and quality control. Our calibration process ensures the accuracy and reliability of Gauss Meters by comparing their readings against traceable standards. We employ specialized equipment and techniques to verify and adjust the instrument's performance across its operational range. Our calibration service helps maintain the integrity of magnetic field measurements, crucial for applications such as non-destructive testing, material analysis, and electromagnetic compatibility assessments. Trust Accredited Labs to keep your Gauss Meters operating at peak performance and in compliance with industry standards.

Accredited Labs provides comprehensive calibration services for Signal/Function Generators from leading manufacturers like Hewlett-Packard, Agilent Technologies, National Instruments, Aeroflex, and Tektronix. These essential electronic devices are crucial in the development, testing, and repair of electronic equipment, generating a variety of electrical waveforms including sine, square, triangular, and sawtooth waves across a wide frequency range. Signal/Function Generators operate by charging and discharging an internal capacitor at varying rates from a current source to produce these diverse waveforms. Our expert calibration ensures the accuracy and reliability of these instruments, verifying their output frequency, amplitude, and waveform characteristics against traceable standards. Trust Accredited Labs to maintain the precision of your Signal/Function Generators, ensuring optimal performance in your electronic testing and development processes.

Accredited Labs offers comprehensive calibration services for RF Power Meters from leading manufacturers such as Wavecontrol, Bird, National Instruments, Agilent Technologies, and Christie Digital Systems. RF Power Meters are essential instruments used to measure radio frequency power characteristics in various applications. These devices consist of a measuring head containing the sensing element, connected to a meter that displays power readings. Similar to spectrum analyzers, RF Power Meters provide accurate measurements of RF signal strength and power levels. Our calibration process ensures the instrument's measuring head and display unit are functioning correctly and providing precise readings across its specified frequency range and power levels. By calibrating your RF Power Meter with Accredited Labs, you can trust that your equipment maintains its accuracy and reliability for critical RF measurements in telecommunications, aerospace, and electronics industries.

Accredited Labs offers comprehensive calibration services for RF Power Sensors from leading manufacturers such as Bird, Keysight Technologies, Inc., Wavecontrol, and Agilent Technologies, Inc. RF Power Sensors are crucial instruments used to measure radio frequency power in various applications, including telecommunications, aerospace, and defense. These sensors provide accurate measurements of RF signal strength and power levels across a wide range of frequencies. Our calibration process ensures the sensor's accuracy by comparing it to traceable standards, adjusting for linearity, and verifying performance across its specified frequency and power ranges. This calibration is essential for maintaining measurement integrity in critical RF applications and complying with industry standards.

Accredited Labs offers comprehensive calibration services for welding equipment from leading manufacturers such as Miller Electric Mfg. Co., Lincoln Electric, Micro Products Corporation, and Daihen. Welders are essential tools in manufacturing and construction, used to join metal parts through the application of heat and pressure. Our calibration process ensures these devices maintain precise control over critical parameters like voltage, current, and wire feed speed. We employ industry-standard techniques and specialized equipment to verify and adjust welding machine outputs, guaranteeing optimal performance and consistency in welding operations. Our expert technicians calibrate various types of welders, including MIG, TIG, and stick welders, to meet or exceed manufacturer specifications and industry standards, ensuring your welding equipment operates at peak efficiency and produces high-quality welds.

Accredited Labs offers comprehensive calibration services for Capacitance Standards, essential instruments used to measure the capacitance of discrete capacitors and other electronic components. These devices typically feature a base meter with option selection capabilities and two leads for connecting to the capacitor under test. Our calibration process ensures accurate measurements by verifying the instrument's ability to charge and discharge capacitors with known currents while precisely measuring voltage rise rates. We also validate additional functionalities such as leakage, equivalent series resistance (ESR), and inductance measurements. Our expert technicians utilize advanced techniques, including bridge circuit configurations, to achieve the highest levels of accuracy. Accredited Labs calibrates capacitance standards from a wide range of manufacturers, guaranteeing reliable performance across various applications in electronics and electrical engineering.

Accredited Labs offers expert calibration services for Resistance Decade Boxes, essential instruments used in electronics and electrical engineering for precise resistance measurements and circuit testing. These boxes contain multiple resistors of varying values that can be selected in discrete steps, allowing users to simulate different resistance loads. Our calibration process ensures the accuracy and reliability of these devices by comparing their output to traceable standards across their full range of resistance values. We employ high-precision measurement techniques to verify and adjust the accuracy of each step, ensuring that your Resistance Decade Box performs within manufacturer specifications. Our calibration service covers equipment from various manufacturers, providing you with confidence in your measurements and compliance with industry standards.

Accredited Labs provides precise calibration services for Resistance Standards, essential devices used to maintain and verify the accuracy of resistance measurements in electrical and electronic applications. These standards serve as reference points for calibrating ohmmeters, multimeters, and other resistance measuring instruments. Our calibration process involves comparing the resistance standard to a higher-accuracy reference standard using specialized equipment and techniques, such as precision bridges or comparison methods. We ensure traceability to national standards and offer calibration for a wide range of resistance values, from milliohms to megohms. Our expert technicians calibrate resistance standards from various manufacturers, guaranteeing reliable and accurate results for your critical measurements.

Accredited Labs offers comprehensive calibration services for Process Calibrators from leading manufacturers such as Fluke Electronics, Yokogawa, Luminex, Vitrek, and Extech Instruments Corporation. Process Calibrators are versatile instruments used to calibrate, maintain, and troubleshoot various process control equipment in industrial settings. These devices typically measure and simulate electrical signals, temperature, pressure, and frequency. Our calibration process ensures the accuracy and reliability of your Process Calibrator by comparing its performance against traceable standards. We verify and adjust multiple functions, including DC voltage and current, resistance, temperature simulation, and pressure measurement, to meet manufacturer specifications and industry standards. Trust Accredited Labs to maintain the precision of your critical process control equipment.

Accredited Labs offers professional calibration services for Milliamp Calibrators, essential instruments used in industrial and laboratory settings to verify and adjust the accuracy of current measurement devices. These calibrators generate precise milliamp signals, typically in the range of 4-20 mA, which are crucial for calibrating and troubleshooting process control instruments, transmitters, and other current loop devices. Our calibration process ensures your Milliamp Calibrator meets manufacturer specifications and industry standards, utilizing high-precision reference equipment traceable to national standards. We calibrate Milliamp Calibrators from various manufacturers, including Omega Engineering and Fluke Electronics, providing you with reliable, accurate, and consistent performance for your critical measurement applications.

Accredited Labs offers expert calibration services for rectifiers, essential devices used to convert alternating current (AC) to direct current (DC). Rectifiers are crucial components in various electrical and electronic applications, including power supplies, battery chargers, and industrial equipment. Our calibration process ensures the accuracy and reliability of rectifiers by verifying their output voltage, ripple, and efficiency against traceable standards. We utilize precision measurement equipment to assess and adjust the rectifier's performance, guaranteeing optimal functionality across a wide range of operating conditions. Accredited Labs' calibration services cover rectifiers from numerous manufacturers, providing you with confidence in your equipment's performance and compliance with industry standards.

Accredited Labs offers professional calibration services for shunts, including those manufactured by Simpson. Shunts are precision resistors used to measure high electrical currents by creating a small voltage drop proportional to the current flowing through them. They are essential components in various electrical measurement applications, such as power monitoring and battery management systems. Our calibration process for shunts typically involves comparing the voltage drop across the device under test to that of a reference standard at multiple current levels. This ensures the shunt's accuracy and traceability to national standards, providing reliable current measurements for our customers' critical applications.

Accredited Labs offers expert calibration services for Resistance Testers from leading manufacturers such as ITW Ransburg, 3M, Miller Electric Mfg. Co., Desco Industries, Inc., and Rohde & Schwarz GmbH & Co KG. Resistance Testers are essential instruments used to measure electrical resistance in various applications, including quality control, product testing, and safety inspections. Our calibration process ensures these devices provide accurate and reliable measurements by comparing them to traceable standards. We verify the tester's performance across its full range, adjusting as necessary to meet manufacturer specifications. Trust Accredited Labs to maintain the precision and effectiveness of your Resistance Testers, supporting your commitment to quality and safety in your operations.

Accredited Labs offers comprehensive calibration services for accelerometers from leading manufacturers such as Bruel & Kjaer, Endevco, PCB Piezotronics, Inc., Lansmont, and Dytran. Accelerometers are sophisticated electromechanical devices designed to measure acceleration forces, both static (like gravity) and dynamic (associated with movement or vibration). These instruments often utilize capacitive sensing technology, where changes in capacitance between microstructures are converted into voltage signals, which are then calculated into acceleration measurements. Accelerometers are crucial in various applications, including impact studies, mobile device screen orientation, and vibration analysis in automotive and HVAC systems. Our calibration process ensures these devices maintain their accuracy and reliability, guaranteeing precise measurements for critical research, product development, and quality control applications across multiple industries.

Accredited Labs offers expert calibration services for Avionics/Ramp Test Sets, including those manufactured by Aeroflex and other leading brands. These sophisticated test sets are critical tools used in the aviation industry for testing and maintaining aircraft communication, navigation, and surveillance systems. Our calibration process ensures these vital instruments meet stringent accuracy requirements, verifying their performance across a wide range of parameters such as signal generation, frequency measurement, and modulation analysis. By utilizing NIST-traceable standards and industry-approved procedures, we guarantee the precision and reliability of your Avionics/Ramp Test Sets, ensuring compliance with regulatory standards and optimal aircraft safety.

Accredited Labs offers comprehensive calibration services for Electrostatic Discharge (ESD) equipment from leading manufacturers such as Desco Industries, Inc., Static Solutions, Avery Weigh Tronix, and Botron. ESD equipment is crucial for preventing damage to sensitive electronic components in various industries. Our calibration process ensures these devices accurately measure and control electrostatic charges, maintaining their reliability and effectiveness. We utilize state-of-the-art techniques to verify and adjust ESD meters, ionizers, work surface monitors, and personal grounding devices. Our expert technicians follow industry standards to provide precise calibration, guaranteeing your ESD equipment performs optimally to protect your valuable electronic assets.

Accredited Labs offers comprehensive calibration services for Ground Testers, essential instruments used to measure earth resistance and soil resistivity in electrical systems. These devices are crucial for ensuring proper grounding, which is vital for safety and equipment protection. Our calibration process involves comparing the Ground Tester's measurements against known reference standards, adjusting for accuracy, and verifying performance across its operating range. We calibrate Ground Testers from leading manufacturers such as Desco Industries, Inc., Yokogawa, Fluke Electronics, AEMC Instruments, and Amprobe. Our expert technicians use state-of-the-art equipment to ensure your Ground Testers meet industry standards and provide reliable results for your electrical safety testing needs.

Accredited Labs provides professional calibration services for Hipot Testers, also known as Dielectric Withstand Testers. These essential safety instruments are used to verify the electrical insulation integrity of various products and components by applying high voltage and measuring leakage current. We calibrate Hipot Testers from leading manufacturers such as Associated Research, GW Instek, Vitrek, Fluke Electronics, and Megger Limited. Our calibration process ensures the accuracy and reliability of your Hipot Tester's voltage output, current measurement, and timing functions. By maintaining proper calibration, you can confidently perform safety tests and comply with industry standards. Trust Accredited Labs to keep your Hipot Tester performing at its best, safeguarding your products and processes.

Accredited Labs offers professional calibration services for insulation testers, also known as insulation resistance testers or megohmmeter. These essential devices measure electrical insulation resistance in various electrical systems and equipment, ensuring safety and compliance with industry standards. Our calibration process verifies the accuracy of insulation testers across multiple test voltages and resistance ranges, typically from 50V to 5000V and 100kΩ to 10TΩ. We utilize high-precision resistance standards and voltage sources to validate measurement accuracy, stability, and linearity. Our calibration services cover instruments from leading manufacturers such as Fluke Electronics, Megger Limited, AEMC Instruments, Extech Instruments Corporation, and Salisbury. Trust Accredited Labs to maintain the reliability and precision of your insulation testing equipment.

Accredited Labs offers comprehensive calibration services for light booths, essential equipment used in various industries for color matching and visual assessment under controlled lighting conditions. Our expert technicians calibrate light booths from a wide range of manufacturers, ensuring accurate and consistent performance. The calibration process typically involves measuring and adjusting the spectral power distribution, color temperature, and illuminance levels of the light sources within the booth. We use specialized spectroradiometers and photometers to verify that the light booth meets industry standards and manufacturer specifications. Our calibration service helps maintain the integrity of color evaluation processes, crucial for quality control in printing, textile, automotive, and other color-critical industries.

Accredited Labs offers expert calibration services for ionizers, essential devices used in various industries to neutralize static charges and maintain clean environments. We calibrate ionizers from leading manufacturers like Lighthouse Technologies, Ion Systems, 3M, and Simco-Ion. Ionizers generate positive and negative ions to balance electrostatic charges on surfaces and in the air, crucial for protecting sensitive electronic components and ensuring product quality. Our calibration process involves measuring ion output, balance, and decay times using specialized equipment such as charge plate monitors. We verify that the ionizer performs within manufacturer specifications and adjust as necessary to ensure optimal performance. Trust Accredited Labs to keep your ionizers operating at peak efficiency, safeguarding your production processes and product integrity.